View BFC233818946_3897086.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document number: 28116 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 07-jan-09 383 interference suppression film capacitors mkp radial potted type mkp 338 1 x1 vishay bccomponents dimensions in mm note (1) |f - f?| < 0.3 mm f = 7.5 + 0.6/- 0.1 mm applications for standard across the line x1 applications. see also application note: www.vishay.com/doc?28153 reference standards ?iec 60384-14 ed-3 and en 60384-14? ?iec 60065, pass. flamm. class b? ul1414; ul1283; csa-c22.2 no. 8 marking c-value; tolerance; rated volt age; sub-class; manufacturer?s type designation; code for dielectric material; manufacturer location; manufacturer?s logo; year, week and safety approvals. dielectric polypropylene film electrodes metallized film construction mono construction rated voltage ac 440 v; 50 to 60 hz features 15 to 27.5 mm lead pitch and 15 mm bent back to 7.5 mm. supplied loose in box, taped on ammopack or reel rohs compliant product permissible dc voltage dc 1000 v encapsulation plastic case, epoxy resin sealed, flame retardant ul-class 94 v-0 climatic testing class acc. to iec 60068-1 55/105/56/b capacitance range (e12 series) e12 series 0.01 to 1 f preferred values acc. to e6 capacitance tolerance 20 %; 10 %; 5 % leads tinned wire maximum application temperature 105 c detail specification for more detailed data and test requirements contact: rfi@vishay.com w ? d t p h l l h h' w ? d t h f 10 f' (1) 15 l t
www.vishay.com for technical ques tions, contact: rfi@vishay.com document number: 28116 384 revision: 07-jan-09 mkp 338 1 x1 vishay bccomponents interference suppressi on film capacitors mkp radial potted type composition of catalog number note (1) for detailed tape specification refer to pa ckaging information: www.vishay.com/doc?28139 or end of catalog specific reference data example: 104 = 10 x 10 = 100 nf (except special numbers) bfc2 338 1x xx x 2222 (*) 338 1x xx x type packaging lead configuration c-tol preferred types 338 1 x1 loose in box lead length 3.5 0.3 mm 20 % bfc2 338 10 ... lead length 5.0 1.0 mm bfc2 338 12 ... lead length 25.0 2.0 mm bfc2 338 14 ... taped on reel (1) bent back to 7.5 mm; h = 16.0 mm; p 0 = 15.0 mm; reel diameter = 500 mm bfc2 338 16 ... alternative taped versions on request 338 1 x1 x1 taped on reel (1) h = 18.5 mm; for p 0 = 12.7 mm; reel diameter = 500 mm 20 % bfc2 338 17 ... alternative c-tol. on request 338 1 x1 loose in box lead length 3.5 0.3 mm 10 % see tables for detail 5 % lead length 5.0 1.0 mm 10 % 5 % lead length 25.0 2.0 mm 10 % 5 % taped on reel (1) bent back to 7.5 mm; 10 % h = 16.0 mm; p 0 = 15.0 mm; reel diameter = 500 mm 5 % h = 18.5 mm; p 0 = 12.7 mm; reel diameter = 500 mm 10 % 5 % type and pitches 338 1 x1 7.5 mm (bent back) 15.0 mm 22.5 mm 27.5 mm multiplier (nf) 0.1 2 13 10 4 100 5 capacitance (numerically) (*) old ordering code description value rated ac voltage (u rac ) 440 v permissible dc voltage (u rdc ) 1000 v tangent of loss angle: at 1 khz at 10 khz c 470 nf 10 x 10 -4 20 x 10 -4 c > 470 nf 20 x 10 -4 70 x 10 -4 rated voltage pulse slope (du/dt) r at 615 vdc pitch = 15 mm and 7.5 mm (bent back) pitch=22.5mm pitch=27.5mm 250 v/s 150 v/s 100 v/s r between leads, for c 0.33 f at 100 v, 1 min > 15 000 m rc between leads, for c > 0.33 f at 100 v, 1 min > 5000 s r between leads and case, 100 v, 1 min > 30 000 m withstanding (dc) voltage (cut off current 10 ma), rise time 100 v/s 3400 v, 1 min withstanding (ac) voltage between leads and case 2380 v, 1 min maximum application temperature 105 c
document number: 28116 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 07-jan-09 385 mkp 338 1 x1 interference suppression film capacitors mkp radial potted type vishay bccomponents c - tol. = 20 % notes (1) weight for short lead products only ? spq = standard packing quantity bent back pitch 7.5 mm (only taped); c-tol. = 20 % notes (1) weight for short lead products only ? spq = standard packing quantity c (f) dimensions w x h x l (mm) mass (g) (1) catalog number bfc2 338 1xxxx and packaging loose in box taped short leads long leads reel diameter = 500 mm l t = 3.5 0.3 mm l t = 5.0 1.0 mm spq l t = 25.0 2.0 mm spq h = 18.5 mm; p 0 = 12.7 mm spq pitch = 15.0 0.4 mm; d t = 0.60 0.06 mm 0.01 5.0 x 11.0 x 17.5 1.0 10103 12103 1000 14103 1000 17103 1100 0.012 10123 12123 14123 17123 0.015 10153 12153 14153 17153 0.018 10183 12183 14183 17183 0.022 10223 12223 14223 17223 0.027 6.0 x 12.0 x 17.5 1.4 10273 12273 1000 14273 1000 17273 900 0.033 10333 12333 14333 17333 pitch = 15.0 0.4 mm; d t = 0.80 0.08 mm 0.039 7.0 x 13.5 x 17.5 1.8 10393 12393 750 14393 500 17393 800 0.047 10473 12473 14473 17473 0.056 8.5 x 15.0 x 17.5 2.4 10563 12563 750 14563 500 17563 650 0.068 10683 12683 14683 17683 0.082 10.0 x 16.5 x 17.5 3.0 10823 12823 500 14823 450 17823 600 0.1 10104 12104 14104 17104 pitch = 22.5 0.4 mm; d t = 0.80 0.08 mm 0.12 8.5 x 18.0 x 26.0 3.8 10124 12124 200 14124 250 17124 450 0.15 10154 12154 14154 17154 0.18 10.0 x 19.5 x 26.0 6.8 10184 12184 200 14184 200 17184 350 0.22 10224 12224 14224 17224 pitch = 27.5 0.4 mm; d t = 0.80 0.08 mm 0.27 11.0 x 21.0 x 31.0 7.4 10274 12274 100 14274 125 0.33 13.0 x 23.0 x 31.0 9.2 10334 12334 100 14334 125 0.39 15.0 x 25.0 x 31.0 12.3 10394 12394 100 14394 125 0.47 10474 12474 14474 0.56 18.0 x 28.0 x 31.0 16.1 10564 12564 100 14564 100 0.68 10684 12684 14684 0.82 21.0 x 31.0 x 31.0 20.3 10824 12824 50 14824 75 1.00 10105 12105 14105 c (f) dimensions w x h x l (mm) mass (g) (2) catalog number bfc2 338 1xxxx and packaging loose in box taped short leads long leads reel diameter = 500 mm (1) l t = 3.5 0.3 mm l t = 5.0 1.0 mm spq l t = 25.0 2.0 mm spq h = 16.0 mm; p 0 = 15.0 mm spq original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; d t = 0.60 0.06 mm 0.010 5.0 x 13.0 x 17.5 1.0 16103 950 0.012 16123 0.015 16153 0.018 16183 0.022 16223 0.027 6.0 x 14.0 x 17.5 1.4 16273 800 0.033 16333 original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; d t = 0.80 0.08 mm 0.039 7.0 x 15.5 x 17.5 1.8 16393 700 0.047 16473 0.056 8.5 x 17.0 x 17.5 1.4 16563 550 0.068 16683 0.082 10.0 x 18.5 x 17.5 3.0 16823 500 0.100 16104
www.vishay.com for technical ques tions, contact: rfi@vishay.com document number: 28116 386 revision: 07-jan-09 mkp 338 1 x1 vishay bccomponents interference suppressi on film capacitors mkp radial potted type c-tol. = 10 % notes (1) weight for short lead products only ? spq = standard packing quantity bent back pitch 7.5 mm (only taped); c-tol. = 10 % notes (1) reel diameter = 356 mm is available on request (2) weight for short lead products only ? spq = standard packing quantity c (f) dimensions w x h x l (mm) mass (g) (1) catalog number bfc2 338 1xxxx and packaging loose in box taped short leads long leads reel diameter = 500 mm (1) l t = 3.5 0.3 mm l t = 5.0 1.0 mm spq l t = 25.0 2.0 mm spq h = 18.5 mm; p 0 = 12.7 mm spq pitch = 15.0 0.4 mm; d t = 0.60 0.06 mm 0.010 5.0 x 11.0 x 17.5 1.0 18114 18314 1000 18514 1000 18914 1100 0.012 18115 18315 18515 18915 0.015 18116 18316 18516 18916 0.018 18117 18317 18517 18917 0.022 6.0 x 12.0 x 17.5 1.4 18118 18318 1000 18518 1000 18918 900 0.027 18119 18319 18519 18919 pitch = 15.0 0.4 mm; d t = 0.80 0.08 mm 0.033 7.0 x 13.5 x 17.5 1.8 18121 18321 750 18521 500 18921 800 0.039 18122 18322 18522 18922 0.047 8.5 x 15.0 x 17.5 2.4 18123 18323 750 18523 500 18923 650 0.056 18124 18324 18524 18924 0.068 10.0 x 16.5 x 17.5 3.0 18125 18325 500 18525 450 18925 600 0.082 18126 18326 18526 18926 pitch = 22.5 0.4 mm; d t = 0.80 0.08 mm 0.10 7.0 x 16.5 x 26.0 2.9 18127 18327 200 18527 250 18927 550 0.12 8.5 x 18.0 x 26.0 3.8 18128 18328 200 18528 250 18928 450 0.15 18129 18329 18529 18929 0.18 10.0 x 19.5 x 26.0 6.8 18131 18331 200 18531 200 18931 350 pitch = 27.5 0.4 mm; d t = 0.80 0.08 mm 0.22 11.0 x 21.0 x 31.0 7.4 18132 18332 100 18532 125 0.27 18133 18333 18533 0.33 13.0 x 23.0 x 31.0 9.2 18134 18334 100 18534 125 0.39 15.0 x 25.0 x 31.0 12.3 18135 18335 100 18535 125 0.47 18136 18336 18536 0.56 18.0 x 28.0 x 31.0 16.1 18137 18337 100 18537 100 0.68 18138 18338 18538 0.82 21.0 x 31.0 x 31.0 20.3 18139 18339 50 18539 75 c (f) dimensions w x h x l (mm) mass (g) (2) catalog number bfc2 338 1xxxx and packaging loose in box taped reel diameter = 500 mm (1) short leads long leads l t = 3.5 0.3 mm l t = 5.0 1.0 mm spq l t = 25.0 2.0 mm spq h = 18.5 mm; p 0 = 12.7 mm spq original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; d t = 0.60 0.06 mm 0.010 5.0 x 13.0 x 17.5 1.0 18714 950 0.012 18715 0.015 18716 0.018 18717 0.022 6.0 x 14.0 x 17.5 1.4 18718 800 0.027 18719 original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; d t = 0.80 0.08 mm 0.033 7.0 x 15.5 x 17.5 1.8 18721 700 0.039 18722 0.047 8.5 x 17.0 x 17.5 2.4 18723 550 0.056 18724 0.068 10.0 x 18.5 x 17.5 3.0 18725 500 0.082 18726
document number: 28116 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 07-jan-09 387 mkp 338 1 x1 interference suppression film capacitors mkp radial potted type vishay bccomponents c-tol. = 5 % notes (1) weight for short lead products only ? spq = standard packing quantity bent back pitch (only taped); c-tol. = 5 % notes (1) reel diameter = 356 mm is available on request (2) weight for short lead products only ? spq = standard packing quantity c (f) dimensions w x h x l (mm) mass (g) (1) catalog number bfc2 338 1xxxx and packaging loose in box taped short leads long leads reel diameter = 500 mm l t = 3.5 0.3 mm l t = 5.0 1.0 mm spq l t = 25.0 2.0 mm spq h = 18.5 mm; p 0 = 12.7 mm spq pitch = 15.0 0.4 mm; d t = 0.60 0.06 mm 0.010 5.0 x 11.0 x 17.5 1.0 18214 18414 1000 18614 1000 18934 1100 0.012 18215 18415 18615 18935 0.015 18216 18416 18616 18936 0.018 18217 18417 18617 18937 0.022 6.0 x 12.0 x 17.5 1.4 18218 18418 1000 18618 1000 18938 900 0.027 18219 18419 18619 18939 pitch = 15.0 0.4 mm; d t = 0.80 0.08 mm 0.033 7.0 x 13.5 x 17.5 1.8 18221 18421 750 18621 500 18941 800 0.039 18222 18422 18622 18942 0.047 8.5 x 15.0 x 17.5 2.4 18223 18423 750 18623 500 18943 650 0.056 18224 18424 18624 18944 0.068 10.0 x 16.5 x 17.5 3.0 18225 18425 500 18625 450 18945 600 0.082 18226 18426 18626 18946 pitch = 22.5 0.4 mm; d t = 0.80 0.08 mm 0.10 8.5 x 18.0 x 26.0 3.8 18227 18427 200 18627 250 18947 450 0.12 18228 18428 18628 18948 0.15 10.0 x 19.5 x 26.0 4.4 18229 18429 200 18629 200 18949 350 0.18 18231 18431 18631 18951 pitch = 27.5 0.4 mm; d t = 0.80 0.08 mm 0.22 11.0 x 21.0 x 31.0 7.4 18232 18432 100 18632 125 0.27 13.0 x 23.0 x 31.0 9.2 18233 18433 100 18633 125 0.33 18234 18434 18634 0.39 15.0 x 25.0 x 31.0 12.3 18235 18435 100 18635 125 0.47 18236 18436 18636 0.56 18.0 x 28.0 x 31.0 16.1 18237 18437 100 18637 100 0.68 18238 18438 18638 0.82 21.0 x 31.0 x 31.0 20.3 18239 18439 50 18639 75 c (f) dimensions w x h x l (mm) mass (g) (2) catalog number bfc2 338 1xxxx and packaging loose in box taped short leads long leads reel diameter = 500 mm (1) l t = 3.5 0.3 mm l t = 5.0 1.0 mm spq l t = 25.0 2.0 mm spq h = 16.0 mm; p 0 = 15.0 mm spq original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; d t = 0.60 0.06 mm 0.010 5.0 x 13.0 x 17.5 1.0 18814 950 0.012 18815 0.015 18816 0.018 18817 0.022 6.0 x 14.0 x 17.5 1.4 18818 800 0.027 18819 original pitch = 15.0 mm; bent back pitch = 7.5 0.4 mm; d t = 0.80 0.08 mm 0.033 7.0 x 15.5 x 17.5 1.8 18821 700 0.039 18822 0.047 8.5 x 17.0 x 17.5 2.4 18823 550 0.056 18824 0.068 10.0 x 18.5 x 17.5 3.0 18825 500 0.082 18826
www.vishay.com for technical ques tions, contact: rfi@vishay.com document number: 28116 388 revision: 07-jan-09 mkp 338 1 x1 vishay bccomponents interference suppressi on film capacitors mkp radial potted type approvals mounting normal use the capacitors are designed for mounting on printed-circuit bo ards. the capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. for detailed tape specifications refer to: ?packaging information?: www.vishay.com/doc?28139 or end of catalog specific method of mounting to withstand vibration and shock in order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: ? for pitches 15 mm capacitors shall be mechanically fixed by the leads ? for longer pitches the capacitors shall be mounted in the same way and the body clamped space requirements on printed-circuit board the maximum length and width of film capacitors is shown in drawing: ? eccentricity as in drawing. the maximum eccentricity is smalle r than or equal to the lead di ameter of the product concerned ? product height with seating plane as given by ?iec 60717? as reference: h max. h + 0.3 mm or h max. h? + 0.3 mm storage temperature ? storage temperature: t stg = - 25 c to + 40 c with rh maximum 80 % without condensation ratings and characteristi cs reference conditions unless otherwise specified, all electrical values apply to an am bient temperature of 23 c 1 c, an atmospheric pressure of 8 6 to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditioning period shall be applied ov er 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. safety approvals x1 voltage value file numbers en 60384-14 (enec) (= iec 60384-14 ed-3 ) 440 vac 10 nf to 1 f f1 2008060 ul1414 250 vac 10 nf to 1 f e112471 ul1283 440 vac 10 nf to 100 nf e109565 ul1283 and (csa-c22.2 no. 8) 440 vac 100 nf to 1 f e109565 cb-test certificate 440 vac 10 nf to 1 f f1 5256 the enec-approval together with the cb-cer tificate replace all national marks of the following countries (they have already sig ned the enec-agreement): austria; belgium; czech. republic; denmark; finland; france; germany; greece; hungary; ireland; italy; luxembo urg; netherlands; norway; portugal; slovenian; spain; switzerland and united kingdom. ? 16 cba11 6 eccentricity l max. = i + 0.3 mm b max. = b + 0.3 mm
document number: 28116 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 07-jan-09 389 mkp 338 1 x1 interference suppression film capacitors mkp radial potted type vishay bccomponents characteristics capacitance as a function of ambient temper ature (typical curve) tangent of loss angl e as a function of frequency (typical curve ) impedance as a function of frequency (typical curve) resonant frequency as a function of capacitance (typical curve) max. rms voltage as a function of frequency m ax. rms current as a function of frequency typical - 50 c/c ( % ) 2 - 2 - 4 - 6 0 050100 t am b (c) 4 min. max. dissipation factor (x 10 - 4 ) 10 10 10 10 10 10 10 10 10 1 234 5 0 1 2 3 f(hz) c = 1 f 220 nf < c < 1 f 47 nf < c 220 nf 10 nf < c 47 nf 10 2 10 1 10 3 10 4 10 5 f (hz) 10 3 10 0 10 -1 10 2 10 1 10 -2 ac c u rrent (ma) 1000 nf 470 nf 100 nf 47 nf 10 nf 10 0 10 -1 10 2 10 1 f (mhz) 10 100 1000 10 000 c (nf) x 1 1 t am b 105 c ac v oltage ( v ) 10 3 10 2 10 1 f (hz) 10 1 10 2 10 3 10 4 10 5 10 2 10 3 10 4 10 1 10 0 10 -1 10 2 10 1 10 3 10 4 10 5 f (hz) 470 nf 100 nf 47 nf 10 nf 1000 nf 1 nf 4.7 nf ac c u rrent (ma) t am b 105 c
www.vishay.com for technical ques tions, contact: rfi@vishay.com document number: 28116 390 revision: 07-jan-09 mkp 338 1 x1 vishay bccomponents interference suppressi on film capacitors mkp radial potted type insulation resistance as a function of ambient temperature application notes ? for x1 electromagnetics interference suppression in standard across the line applications (50/60 hz) with a maximum mains voltage of 440 vac. ? for series impedance applications we refe r to application note www.vishay.com/doc?28153 ? these capacitors are not intended for continuous pulse applicat ions. for these situations, capacitors of the ac and pulse programs must be used. ? the maximum ambient temperature must not exceed 105 c. ? rated voltage pulse slope: if the pulse voltage is lower than the rat ed voltage, the values of the specific re ference data can be multiplied by 615 vdc an d divided by the applied voltage. 10 6 10 5 10 4 0 20 40 60 8 0 100 t am b (c) rc (s)
document number: 28116 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 07-jan-09 391 mkp 338 1 x1 interference suppression film capacitors mkp radial potted type vishay bccomponents inspection requirements general notes: 1. sub-clause numbers of tests and perfo rmance requirements refer to the ?sectional spec ification, publication iec 60384-14 ed-3 and specific reference data.? group c inspection requirements sub-clause number and test conditions performance requirements sub-group c1a part of sample of sub-group c1 4.1 dimensions (detail) as specifi ed in chapters ?general data? of this specification initial measurements capacitance tangent of loss angle at 10 khz 4.3 robustness o terminations tensile: load 10 n; 10 s bending: load 5 n; 4 x 90 no visible damage 4.4 resistance to soldering heat no pre-drying method: 1a solder bath: 280 c 5 c duration: 10 s 4.19 component solvent resistance isopr opylalcohol at room temperature method: 2 immersion time: 5 0.5 min recovery time: min. 1 h, max 2 h 4.4.2 final measurements visual examination no visible damage legible marking capacitance | c/c| 5 % of the value measured initially tangent of loss angle increase of tan 0.008 compared to values measured initially insulation resistance as specified in section ?insulation resistance? of this specification sub-group c1b part of sample of sub-group c1 initial measurements capacitance tangent of loss angle at 10 khz 4.20 solvent resistance of the marking i sopropylalcohol at room temperature method: 1 rubbing material: cotton wool immersion time: 5 0.5 min no visible damage legible marking 4.6 rapid change of temperature a = - 55 c b = + 105 c 5 cycles duration t = 30 min
www.vishay.com for technical ques tions, contact: rfi@vishay.com document number: 28116 392 revision: 07-jan-09 mkp 338 1 x1 vishay bccomponents interference suppressi on film capacitors mkp radial potted type 4.6.1 inspection 4.7 vibration visual examination mounting: see section ?mounting? of this specification procedure b4 frequency range: 10 to 55 hz amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) total duration 6 h no visible damage 4.7.2 final inspection visual examination no visible damage 4.9 shock mounting: see section ?mounting? for more information pulse shape: half sine acceleration: 490 m/s2 duration of pulse: 11 ms 4.9.2 final measurements visual examination no visible damage capacitance | c/c| 5 % of the value measured initially tangent of loss angle increase of tan 0.008 compared to values measured initially insulation resistance as specifi ed in section ?insulation resistance? of this specification sub-group c1 combined sample of specimens of sub-groups c1a and c1b 4.11 climatic sequence 4.11.1 initial measurements capacitance measured in 4.4.2 and 4.9.2 tangent of loss angle: measured initially in c1a and c1b 4.11.2 dry heat temperature: 105 c duration: 16 h 4.11.3 damp heat cyclic te s t d b first cycle 4.11.4 cold temperature: - 55 c duration: 2 h 4.11.5 damp heat cyclic te s t d b remaining cycles 4.11.6 final measurements visual examination no visible damage legible marking capacitance | c/c| 5 % of the value measured in 4.11.1. tangent of loss angle increase of tan 0.008 compared to values measured in 4.11.1. voltage proof 1900 vdc; 1 min between terminations no permanent breakdown or flash-over insulation resistance 50 % of values specified in section ?insulation resistance? of this specification sub-clause number and test conditions performance requirements
document number: 28116 for technical questions, contact: rfi@vishay.com www.vishay.com revision: 07-jan-09 393 mkp 338 1 x1 interference suppression film capacitors mkp radial potted type vishay bccomponents sub-group c2 4.12 damp heat steady state 56 days, 40 c, 90 to 95 % rh no load 4.12.1 initial measurements capacitance tangent of loss angle at 1 khz 4.12.3 final measurements visual examination no visible damage legible marking capacitance | c/c| 5 % of the value measured in 4.12.1. tangent of loss angle increase of tan 0.008 compared to values measured in 4.12.1. voltage proof 1900 vdc; 1 min between terminations no permanent breakdown or flash-over insulation resistance 50 % of values specified in section ?insulation resistance? of this specification sub-group c3 4.13.1 initial measurements capacitance tangent of loss angle at 10 khz 4.13 impulse voltage 3 successive impulses, full wave, peak voltage: x1: 4 kv max. 24 pulses no self healing breakdowns or flash-over 4.14 endurance duration: 1000 h 1.25 x u rac at 105 c once in every hour the voltage is increased to 1000 v rms for 0.1 s via resistor of 47 5 % 4.14.7 final measurements visual examination no visible damage legible marking capacitance | c/c| 10 % compared to values measured in 4.13.1. tangent of loss angle increase of tan 0.008 compared to values measured in 4.13.1. voltage proof 1900 vdc; 1 min between terminations 2380 vac; 1 min between terminations and case. no permanent breakdown or flash-over insulation resistance 50 % of values specified in section ?insulation resistance? of this specification sub-group c4 4.15 charge and discharge 10 000 cycles charged to 615 vdc discharge resistance: 4.15.1 initial measurements capacitance tangent of loss angle at 10 khz sub-clause number and test conditions performance requirements r 615 vdc 1.5 x c (du/dt) --------------------------------------- =
www.vishay.com for technical ques tions, contact: rfi@vishay.com document number: 28116 394 revision: 07-jan-09 mkp 338 1 x1 vishay bccomponents interference suppressi on film capacitors mkp radial potted type 4.15.3 final measurements capacitance | c/c| 10 % compared to values measured in 4.15.1. tangent of loss angle increase of tan 0.008 compared to values measured in 4.15.1. insulation resistance 50 % of values specified in section ?insulation resistance? of this specification sub-group c5 4.16 radio frequency charac teristic resonance frequency 0.9 times value as specified in section ?resonant frequency? of this specification sub-group c6 4.17 passive flammability class b bore of gas jet: ? 0.5 mm fuel: butane test duration for actual volume v in mm3: v 250: 10 s 250 < v 500: 20 s 500 < v 1750: 30 s v > 1750: 60 s one flame application after removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. no burning particle must drop from the sample. sub-group c7 4.18 active flammability 20 cycles of 4 kv discharges on the test capacitor connected to u rac the cheese cloth around the capacitors shall not burn with a flame. no electrical measur ements are required. sub-clause number and test conditions performance requirements 45.0 ~ 8 mm 12 mm
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of BFC233818946

	To Download BFC233818946 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .